Note: When performing the reset, make sure the camera is connected to a power source.

1.  When connected to a charger the camera will display a solid red light 

2.  Wait 25 seconds for a solid blue light to appear 

3.  Next locate the reset pin hole on the back of the camera 

4.  Press the pin hole for 3 seconds until the camera beep. 
   [A reset tool pin (shown below) is provided within the mounting kit]
   
   

5. The solid blue light will then turn to a solid red light.
6. Wait 25-30 seconds for the red light to blink (This indicates the reset has been completed).